Top 10 Questions for Form Stripper Interview

1. Explain the process of stripping forms?

The process of stripping forms involves the following steps:

• Prepare the surface by cleaning it and applying a release agent.
• Place the formwork in position and secure it.
• Pour the concrete into the formwork and allow it to set.
• Once the concrete has set, carefully remove the formwork, being careful not to damage the concrete.

2. What are the different types of form strippers?

Manual form strippers

• Used to remove small to medium-sized forms.
• Require manual labor to operate.

Hydraulic form strippers

• Used to remove large or complex forms.
• Powered by hydraulic pressure to generate the force needed to remove the forms.

Mechanical form strippers

• Used to remove forms from vertical surfaces.
• Use a mechanical system to generate the force needed to remove the forms.

3. What are the factors that affect the stripping time of forms?

• Type of concrete used.
• Temperature of the concrete.
• Humidity of the air.
• Type of formwork used.

4. What are the safety precautions that should be taken when stripping forms?

• Wear appropriate personal protective equipment (PPE), such as gloves, safety glasses, and a hard hat.
• Be aware of the location of overhead hazards, such as power lines and scaffolding.
• Use proper lifting techniques to avoid injury.
• Do not attempt to strip forms that are too heavy or that are in an unstable position.

5. What are the consequences of stripping forms too early?

• Concrete may not have reached its full strength, which could lead to structural failure.
• Concrete may crack or spall, which could damage the appearance of the structure.
• Concrete may not properly bond to the reinforcement, which could lead to structural problems.

6. What are the consequences of stripping forms too late?

• Concrete may become bonded to the formwork, which could make it difficult to remove the forms.
• Concrete may shrink, which could cause the forms to crack or break.
• Concrete may become contaminated with dirt or debris, which could damage the appearance of the structure.

7. What tools and equipment are used by form strippers?

• Hammers
• Crowbars
• Pry bars
• Sledgehammers
• Hydraulic jacks
• Mechanical form strippers

8. What are the different types of concrete finishes that can be achieved using form strippers?

• Smooth finish
• Textured finish
• Exposed aggregate finish
• Stamped concrete finish

9. What are the challenges of working as a form stripper?

• The work can be physically demanding.
• The work can be dangerous, as there is a risk of falling or being struck by falling objects.
• The work can be repetitive, which can lead to boredom.
• The work can be affected by weather conditions, such as rain, snow, and extreme heat.

10. What are the rewards of working as a form stripper?

• The work can be satisfying, as you can see the results of your labor.
• The work can be well-paid, depending on your experience and skills.
• The work can provide opportunities for advancement, such as becoming a formwork carpenter.

Form strippers are responsible for ensuring the safe and efficient removal of forms from concrete structures after they have been poured. They work in a variety of settings, including construction sites, precast concrete plants, and manufacturing facilities.

1. Form Removal

Form strippers use a variety of tools and techniques to remove forms from concrete structures. These tools may include pry bars, hammers, and hydraulic jacks. Strippers must be careful not to damage the concrete surface when removing forms.

• Use proper tools and techniques to remove forms without damaging the concrete surface.
• Follow safety protocols to prevent injuries and accidents.

2. Form Cleaning and Maintenance

Form strippers are also responsible for cleaning and maintaining forms after they have been removed from concrete structures. This includes removing any concrete residue, dirt, or debris from the forms. Strippers may also be required to repair or replace damaged forms.

• Clean and maintain forms to ensure they are in good condition for reuse.
• Repair or replace damaged forms to prevent concrete defects.

3. Material Handling

Form strippers may also be responsible for handling and transporting forms and other materials on construction sites. This may involve using forklifts, cranes, or other equipment.

• Handle and transport forms and other materials safely and efficiently.
• Operate equipment safely and in accordance with company policies.

4. Safety and Compliance

Form strippers must follow all safety protocols and regulations. This includes wearing proper personal protective equipment (PPE) and following safe work practices. Strippers must also be aware of the potential hazards associated with their work, such as falling objects and sharp edges.

• Follow all safety protocols and regulations to prevent injuries and accidents.
• Wear proper PPE and follow safe work practices.

Preparing for an interview for a Form Stripper position can be daunting, but by following these tips, you can increase your chances of success.

1. Research the Company and Position

Before the interview, take some time to research the company and the specific position you are applying for. This will help you to understand the company’s culture and values, as well as the specific requirements of the job. You can find information about the company on their website, social media pages, and Glassdoor.

• Visit the company website and social media pages to learn about their culture and values.
• Read reviews on Glassdoor to get insights into the company culture and work environment.

2. Practice Your Answers to Common Interview Questions

There are a number of common interview questions that you are likely to be asked, such as “Tell me about yourself” and “Why are you interested in this position?” It is helpful to practice your answers to these questions in advance so that you can deliver them confidently and concisely.

• Prepare answers to common interview questions, such as “Tell me about yourself” and “Why are you interested in this position?”
• Practice your answers out loud to improve your delivery and confidence.

3. Be Prepared to Talk About Your Experience

The interviewer will likely want to know about your experience as a Form Stripper. Be prepared to discuss your skills and experience in detail, including any specific projects or accomplishments that you are particularly proud of.

• Highlight your skills and experience as a Form Stripper.
• Discuss specific projects or accomplishments that demonstrate your abilities.

4. Dress Professionally and Arrive on Time

First impressions matter, so it is important to dress professionally for your interview. You should also arrive on time to show the interviewer that you are respectful of their time. Arriving late or looking unprofessional can make a negative impression.

• Dress professionally for the interview.
• Arrive on time to demonstrate respect for the interviewer’s time.